0 10 20 30 40 60 80 70 50 100 90 01 23 45 67 89 10 11 12 input voltag e output voltage % output voltage vs. input voltag e page 1 model output voltage* 2 output current* 1 GP01 100v 10ma gp02 200v 5ma gp03 300v 3.3ma gp05 500v 2ma gp06 600v 1.67ma gp08 800v 1.25ma gp10 1kv 1ma gp12 1.2kv 840ua gp15 1.5kv 660ua gp20 2kv 500ua gp25 2.5 kv 400ua gp30 3 kv 340ua gp40 *5 4 kv 250ua gp50 *5 5 kv 200ua gp60 *5 6 kv 166ua 100v to 6kv at 1w product description proven reliability gp series isolated, proportional dc to hv dc converters applications options product description product selection table features ? proportional input/output ? compact, pcb mount package ? low power consumption ? low ripple, low emi / rfi ? short circuit protected ? input/output isolation ? low leakage current ? low input/output coupling capacitance ? no external components required ? no minimum load required ? mtbf: >2.31 million hrs per bellcore tr-332 ? ul certifed encapsulant, meets 94v-0 flammability ? rohs compliant ? portable, battery powered ? sustaining ion pumps ? vacuum gauges ? photomultiplier tubes ? spectrometry ? electrostatic chuck ? non-impact printers ? field generation ? piezo devices ? electrophoresis ? external mounting enclosure (ab suffx) the gp series is a line of miniature dc to hv dc converters providing 100v to 6kv, positive or negative in a compact pc mount package. this line features low power consumption, making it ideal for portable, battery powered applications. the isolated output is proportional to the input, and is linear from approximately 0.7 volts in. a low noise quasi- sinewave oscillator and shielded transformer provide clean, reliable dc to hv dc conversion with low emi and rfi. the isolated output allows for user selectable output polarity. no minimum load is required. 4728x01 www.xppower.com
reversible model output voltage *2 output current *1 input current (no load) input current (full load) ripple GP01 0 to 100v 10ma <45ma <150ma <0.75% gp02 0 to 200v 5ma <45ma <150ma <1.75% gp03 0 to 300v 3.3ma <45ma <125ma <0.50% gp05 0 to 500v 2ma <15ma <125ma <0.50% gp06 0 to 600v 1.67ma <15ma <125ma <0.50% gp08 0 to 800v 1.25ma <25ma <125ma <0.75% gp10 0 to 1kv 1ma <15ma <125ma <0.75% gp12 0 to 1.2kv 840ua <15ma <125ma <0.75% gp15 0 to 1.5kv 660ua <20ma <125ma <0.75% gp20 0 to 2kv 500ua <30ma <130ma <0.75% gp25 0 to 2.5kv 400ua <30ma <130ma <1.0% gp30 0 to 3kv 340ua <40ma <130ma <1.0% gp40 *5 0 to 4kv 250ua <50ma <130ma <1.0% gp50 *5 0 to 5kv 200ua <75ma <150ma <1.5% gp60 *5 0 to 6kv 166ua <85ma <175ma <1.0% page 2 electrical specifications * 3 gp series 4728x01 www.xppower.com
page 3 parameter value input voltage 0 to 12v turn-on voltage <0.7v isolation < +/-3.5kv bias input capacitance 120uf response time <20ms output voltage tolerance +/-3% (full load, 100% output voltage) regulation <10% variation over load range frequency 60-400khz operating temperature *4 -20c to +70c (case) storage temperature -20c to +105c gp series electrical specifications * 3 4728x01 www.xppower.com
page 4 pin # function 1 (+) input 2 (-) input 3 (+) output 4 (-) output parameter value weight weight: 1.40 oz (40 grams) volume 1.4 cubic inches (23 cubic centimeters) dimensions 1.5l (38.1l) x 1.5w (38.1l) x 0.63h (16.0h) case material diallyl phthalate (dap) GP01 thru gp60 mechanical specificaions gp series top view high voltag e 1.50 (38.10 ) 1.50 (38.10 ) 0.03 1 (0.79) ? pc pi n 4 places 0.63 (16.00 ) 0.15 (3.81) 1.20 0 (30.48 ) 0.15 (3.81) 1.20 0 (30.48 ) 1 2 4 3 recommende d hole & pad o.d. si ze : ? 0.052 (1.32 )& ? 0.082 (2.08 ) 4 places 0.20 (5.08) recommended pcb layout top view 0.80 0 (20.32) 0.35 (8.89) dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4728x01 www.xppower.com
page 5 gp series C accessory 2.40 (60.96 ) 1.60 (40.64 ) 0.80 (20.32 ) 0.30 0 (7.62) 2.00 0 (50.80 ) 0.31 (7.87) 0.68 (17.27 ) 0.40 (10.16 ) 0.20 (5.08) 1.60 (40.64 ) 0.30 0 (7.62) ? 0.140 (3.56) thru 2 places 4-40 solderabl e grounding stud 2 places high voltag e top view side view the ab series provides low cost emi/rfi shielding and rugged mounting for xp emco high voltage dc to dc converters. these fve-sided aluminum enclosures feature a durable, non-conductive black anodized fnish. the enclosures are manufactured at our own sheet metal fabrication facility, which allows for low cost and stock delivery. add an ab suffx to the model number for a factory-installed enclosure (e.g. e10ab). contact our sales department by phone, fax or email for immediate attention. on models with outputs of 3kv or higher, special care must be taken to ensure adequate spacing and insulation between the metal can and the high voltage output. single sided layout, encapsulants or conformal coating may be required. case grounding stud must be connected to ground. case ground is not internally connected to (-) input. shield description application information parameter value box size see table material 0.03 (0.76mm) aluminum mounting two tabs with thru-holes parameter value ground black anodized aluminum dimensions with tab 2.4l (60.96) x 1.6w (40.64) x 0.68h (17.27) dimensions without tab 1.6l (40.64) x 1.6w (40.64) x 0.68h (17.27) external emi/rfi shield dimensions are in inches (metric equivalents are in parenthesis) dimensional tolerances: .xx = + - 0.02 (0.51), .xxx = + - 0.005 ( 0.127) 4728x01 www.xppower.com
page 6 * notes: 1. at maximum rated output voltage. 2. output voltage is load dependent. under light or no load conditions, reduce input voltage so maximum rated output voltage is not exceeded. 3. specifcations after 30 minute warm up, full load, at 25c unless otherwise indicated. 4. proper thermal management techniques are required to maintain safe case temperature at maximum power output. 5. models gp40, gp50 & gp60 do not have internal bleeder resistors on the output. provisions must be made externally to discharge the output capacitors if this feature is desired. xp emco reserves the right to make changes on products and literature, including specifcations, without notice. xp emco standard product models are not recommended for copy-exact applications or any other application restricting product changes. copy-exact options are available. please contact an xp emco sales representative for more details. how to order transforme r oscillator (+) output (-) output (+) in (-) in rectifier & multiplie r model output voltage (see table) example: gp10ab (gp-model, 10-output voltage, ab-shielding & mounting enclosure) part number selector : model number: gp10ab shielding & mounting enclosure (optional) gp series block diagram option code table option order code models options shielding and mounting enclosure ab all 4728x01 www.xppower.com
|
